Pages

Thursday, August 18, 2011

Families Thrilled New Law Legalizes Kids OHV

Obama signs lead law-exemption bill for kids' off-highway vehicles
August 12, 2011




In a victory for families who enjoy responsible motorized recreation, President Barack Obama has signed into law a bill to allow the sale of kids' off-highway vehicles (OHVs) to continue, the American Motorcyclist Association (AMA) reports.

On Aug. 12, Obama signed into law H.R. 2715, introduced by Reps. Mary Bono Mack (R-Calif.) and G.K. Butterfield (D-N.C.). The measure exempts kids' OHVs from the Consumer Product Safety Improvement Act (CPSIA) of 2008, known as the lead law.

The CPSIA, which went into effect on Feb. 10, 2009, banned the making, importing, distributing or selling of any product intended for children 12 and under, including kids' dirtbikes and all-terrain vehicles (ATVs), that contained more than a specified amount of lead in any accessible part that might be ingested.

H.R. 2715 cleared the House by a 421-2 vote on Aug. 1 just before lawmakers went into their summer recess, and earned Senate approval by unanimous consent the same day.

The new law is a victory that is the result of nearly three years of intensive efforts by the AMA and its partner organization, the All-Terrain Vehicle Association (ATVA), their members and millions of advocates of responsible OHV recreation.

"Federal legislators deserve a lot of thanks for their tireless efforts, especially U.S. Rep. Denny Rehberg (R-Mont.), U.S. Sen. Amy Klobuchar (D-Minn.) and all the other lawmakers who supported an exemption," said AMA President and CEO Rob Dingman. "Hundreds of thousands of parents, kids and motorcycling club members responded to AMA calls for action to contact their elected officials and their efforts, along with all those volunteers who circulated petitions and took other actions, brought this issue to the attention of Congress and turned the tide in our favor.

"I'm sure that those letters, emails and telephone calls to Congress had a major impact in convincing lawmakers to exempt OHVs from the lead law," Dingman said. "I'm also convinced that the AMA Family Capitol Hill Climb held on May 26 played a major role, since it put a human face on the issue by showing lawmakers the kids and families who are suffering because of the CPSIA.

"I want to thank Racer X magazine, Doublin Gap Motocross Park, Mason Dixon Riding Association 6 and 7, Tomahawk MX Park, the Middle Atlantic Motocross Association, Budds Creek Motocross Park, High Point Raceway, and advocates such as the Yentzer family and Moto-Patriot Nancy Sabater, who brought youngsters to Washington, D.C., for the AMA Family Capitol Hill Climb to lobby their lawmakers," he said.

Dingman also thanked other organizations and individuals that worked diligently on the effort, including the Motorcycle Industry Council and Specialty Vehicle Institute of America, which represent the motorcycle and ATV industries; the motorcycle enthusiast and trade media; Sean Hilbert, president of Cobra Motorcycles, which makes kids' dirtbikes; the Coombs family and Tim Cotter of MX Sports, which has conducted the famed AMA Amateur National Motocross Championship featuring thousands of promising young riders for the past 30 years, and Kirk "Hardtail" Willard, president of the Motorcycle Riders Foundation.

"I want to extend a very special thanks to Malcolm Smith, a member of the Motorcycle Hall of Fame, who brought a lot of attention to the unfairness of the lead law when he hosted a media event at Malcolm Smith Motorsports and sold some youth OHVs as a symbolic gesture to protest the law," Dingman said.

The AMA has been at the forefront of the fight to exclude child-sized motorcycles and ATVs from the CPSIA since early 2009. The association has participated in news events to focus media attention on the issue, lobbied on Capitol Hill, and organized campaigns to encourage riders and parents to contact their federal lawmakers and key decision-makers to exempt kids' OHVs from the CPSIA.

As a result, every single member of Congress, as well as members of the Consumer Product Safety Commission (CPSC), has received powerful statements from members of the AMA and ATVA.

The AMA magnified these efforts through its "Kids Just Want to Ride" campaign. To read more of what the AMA has done in its efforts to exempt kids' OHVs from the CPSIA, go to http://www.americanmotorcyclist.com/Rights/KeepKidMotorcyclesAndATVsLegal.aspx.

Aimed at children's toys, the CPSIA ensnared kids' dirtbikes and ATVs because trace levels of lead can be found in parts such as batteries and brake calipers. Other children's products were also affected by the CPSIA, such as books, clothes and microscopes.

The CPSC, which is responsible for implementing the CPSIA, delayed enforcement of certain parts of the law until the end of this year, granting a reprieve for child-sized dirtbikes and ATVs. That gave those concerned about the law time to change it before the reprieve ended.

Arctic Cat Wildcat - Release date - Fall of 2011

Arctic Cat Wildcat

Lock yours in with a deposit now!


Delivery is due for late fall, early winter.

These will be rarer than Hens Teeth initially!
2012 Arctic Cat Wildcat 1000i H.O.


Wildcat 1000i H.O.


A Race-Inspired, Pure-Sport
ROV That’s Made in America


Inspired by the unforgiving terrain of the Baja 1000,
engineered to attack the gnarliest obstacles with precision and control, and
crafted in America by a company dedicated to performance and quality, the
all-new Arctic Cat Wildcat V-Twin 1000H.O. debuts as the most potent pure-sport
recreational off-road vehicle (ROV) ever built.


With industry-leading suspension travel, 13 inches of ground
clearance, a full-perimeter frame and the largest displacement engine in its
class, the Wildcat is a full-production version of what was previously reserved
for off-road race vehicles.


“The Wildcat has no equal. Period,” said Claude Jordan, Arctic
Cat President and CEO. “Our customers asked for a high-performance side-by-side,
and we happily responded with a no-compromise, pure-sport hot rod that redefines
what’s possible with a production off-road vehicle.”


SUSPENSION: Ultimate Long Travel


The Wildcat can effortlessly hammer through whoops and dunes
thanks to a front and rear suspension combination that rivals those used on
off-road race buggies.


At the rear is an industry-first 5-pointmulti-link trailing
arm suspension that keeps the tires’ contact patches flat while the suspension
moves through its industry-leading 18 inches of travel.


The unique 5-pointmulti-linkminimizes camber and axle plunge
to soak up the harshest terrain without compromising handling and steering.


The double-wishbone front suspension boasts a best-in-class 17
inches of travel, with geometry that’s optimized for stability and control.


Both the front and rear suspensions are dampened by Walker
Evans Racing shocks. Designed from a lifetime of off-road competition and
experience and also made in the USA, these remote reservoir shocks are machined
from billet aluminum and feature 17-position compression dampening
adjustability, dual-rate springs and preload adjustment.


They’re calibrated with ample ride-in to keep the Wildcat’s
tires on the ground, with consistent dampening for hours of hard riding.


The all-new Duro Kaden 14-in tires were developed specifically
for the Wildcat, utilizing an elongated tread pattern designed to extend to the
tires shoulder, providing excellent cornering, traction, performance and
durability in rough conditions.


CHASSIS: Full-Perimeter Exoskeleton


The foundation for the Wildcat’s suspension is a
full-perimeter frame that sets a new standard in strength, rigidity and
durability. Usually found only in off-road race trucks, the chassis is
constructed from High Strength Low Alloy (HSLA) steel with a full-perimeter
exoskeleton design that’s a first in the ROV class.


With a 40/60 front/rear weight distribution, the Wildcat’s
front end remains light for optimal handling when tackling gnarly terrain.
Occupants in the cockpit of the Wildcat are positioned close to the low
center-of-gravity (CG), leaving them less affected by movements of the
suspension and chassis and producing a more comfortable and confident ride.


1000 H.O. ENGINE: Built in St. Cloud, Minnesota


The 1000 H.O engine that powers the new Wildcat is the largest
displacement engine in the Pure Sport category, and the ideal match for the
industry-leading suspensions and chassis combo.


Built in the USA by Arctic Cat, the 951cc V-Twin, SOHC
4-stroke with Electronic Fuel Injection (EFI) has proven itself on the Prowler
XTZ.


On the Wildcat, the 1000 H.O. has been tuned to deliver even
stronger acceleration thanks to the extra torque and horsepower provided by
heavy breathing 50mmthrottle bodies, a new 2-into-1 ceramic-coated exhaust and
an all-new air intake system.


The close-coupled, mid-chassis engine location neutralizes the
Wildcat’s handling, maximizes the rider/passenger volume and reduces cockpit
noise.


The engine transfers power to the driveshaft via the Duramatic
automatic CVT transmission. The addition of the Spike Load Dampener (SLD) allows
the driveline to slip for a millisecond under harsh spike loads, reducing the
torque load to the system for optimal durability.


A console-mounted shifter allows quicker gear selection
between Reverse, Neutral, High and Low gears. Likewise, a dash-mounted switch
activates 2- or 4-wheel drive with differential lock. Four-wheel hydraulic disc
brakes provide strong, enhanced braking.


Electronic Power Steering


Yet another first-in-class technology, the addition of Arctic
Cat’s Variable Assist Electronic Power Steering (EPS) on the Wildcat delivers
even greater steering control and ease. The EPS system is a managed electronic
control unit (ECU) that measures steering input force, tire resistance and
vehicle speed, and then provides the appropriate assist to the steering column
through an electric motor. Steering assistance begins at idle, and varies based
on the above inputs.


The result: Light steering input effort at speed while
maintaining the right amount of driver feedback to feel the limits of traction
and control.


The power assist is particularly noticeable at low speeds and
when in 4WD (especially with the differential locked),where its reduced steering
effort eases changing direction or navigating tough obstacles like washouts,
rocks or mud.



2012 Arctic Cat Wildcat 1000i H.O.


INTERIOR: Comfortable and Controlled


Arctic Cat engineers designed the Wildcat’s interior for
optimal occupant comfort, control and visibility. Contoured, high-back bucket
seats with upper body supports deliver exceptional comfort and body stability,
and rival any aftermarket suspension seat on the market. The cut and sewn design
cradles the Wildcat occupants to minimize fatigue. A 3-point seat belt with an
anti-cinch design keeps you in place and comfortable through the harshest
terrain.


Getting in and out of the Wildcat is quick and easy thanks to
a tube-frame door with integrated nets. Pivoting from the rear and latching at
the front via a simple one-latch mechanism, the doors open quickly and easily,
swinging out of the way for hassle-free entry/departure. An infinitely
adjustable tilt steering wheel allows you to adjust your steering preferences.


A new5-inch digital/analog round gauge provides great
readability with its mid-dash location. It displays up to 14 critical operations
including: clock/hour meter, fuel level, mode button, set/reset button,
odometer/trip, gear position, speedometer/tachometer, differential lock, drive
select, high beam, battery condition, temperature and oil pressure.


A locking glove box offers ample, convenient storage, while
two easy-to- reach cup holders are located where beverages won’t interfere with
driving controls or arms.


PREMIUM FEATURES


The all-new Wildcat is rich with premium features starting
with two automotive-style painted color choices: Black Metallic or Arctic Green
Metallic.


Class-leading LED headlights and taillights project a light
that’s clearer than an HID, with two times brighter Lumens than a halogen system
(while utilizing 50 percent less wattage).


The Wildcat’s rear cargo bed has the largest capacity in its
class with a 300 lb. payload to carry a cooler and additional fuel containers.


A 12V accessory outlet is located in the center console for
GPS or cell phone adapters. The alternator capacity has been increased for
accessory lights, radios or winches.


The underside of the Wildcat features full-protection HDPE
skid plates to glide over protruding obstacles, while the chassis utilizes
maintenance-free bushings for hassle-free durability.


ACCESSORIES: Simple Customization


Arctic Cat will offer more than 50 Wildcat-specific products
for the ultimate in customization. These easy-to-install parts, accessories and
upgrades can be used to personalize and compliment the lines of the ultimate
pure sport ROV.


An array of trick lightweight aluminum protective accessories
will be available, like front and rear pre-runner bumpers, rock sliders, A-arm
guards and skid plates.

A contoured half windshield with a dust management system will
divert the wind up and over the rider while the stylized T-top style roof with
integrated rear spoiler and built in headliner has room to install your tunes.
Look for other items like a gas can holder, spare tire carrier, cooler holder,
fender flares and a box cover to arrive shortly among a host of other products.

Below are the Arctic Cat Wildcat
1000i H.O. specifications:


2012 Arctic Cat Wildcat 1000i H.O.